Productomschrijving

AOR AR-2300 black-box receiver

Computer gestuurde ontvanger met digital signal processing (DSP)

De AR-2300 is een Black-Bopx uitvoering van de AR-5001D, een high-performance ontvanger van AOR.

Alle functies zijn beschikbaar op de aangesloten PC of lap-top. Er is een optionele LAN controller beschikbaar voor remote bediening.

Download hier de brochure.

FEATURES, FUNCTIONS AND SPECIFICATIONS:

Digital signal processing:
Input signals after the 45.05 MHz IF are converted from analog to digital by a DSP processor.
There is no AGC in the analog processing unit, as all processing, including AGC, is done by DSP.
High-performance analog front-end: Analog signal processing is performed by a computer simulated, high-performance distribution constant filter.
DDS local oscillator: Instead of the conventional PLL method, the first local frequency is produced by direct digital synthesis. That method allows frequency switching at high speed.
F output: An analog IF of 15 MHz (+/-7.5 MHz) bandwidth is output.
Digital I/Q output: A digital I/Q signal of 0.9MHz is output via a USB 2.0 interface.
High precision frequency reference: 0.01ppm frequency stability of the 10 MHz internal master oscillator is achieved when using the optional GPS receiver unit.
FFT analyzer: Thanks to the onboard FFT processor, 10 MHz wide spectrum data can be output at high speed via serial.
Optional APCO25 Phase 1 digital voice demodulation
Video demodulation
By connecting and external TV monitor, it is possible to demodulate the signal of FM modulation security cameras and analog TV broadcasts. When you connect the TV monitor, you can check the demodulated video.
Not compatible with digital terrestrial television.
Simultaneous monitoring
2 band reception, offset reception, triple reception (restrictions apply).
SD card slot
You can record the received audio on SD, as well as backing up receiver settings and memory data.
12 kHz analog I/Q output
Allows DRM broadcasts decoding via a PC and dedicated 3rd party software.
HF direct sampling. When receiving HF signals, the signals are converted directly to digital without entering the mixer. This allows very good linearity characteristics.
Control via LAN/Internet with optional ARL2300 Ethernet Controller